Company news

MEISHUO ESD foam

1. Difference between anti-static ESD foam and conductive ESD foam IXPE conductive / anti-static foam: the product is extruded polyethylene or modified polyethylene and conductive filler and antistatic agent. After radiation crosslinking and high temperature foaming, conductive / anti-static foam plastics are made. Its surface resistance and volume resistance are

view

Working Principle of foil insulation foam

The Heat is an energy, transmits in three ways, conduction, convection, radiation. Through the high temperature to low temperature transfer, and ultimately achieve the dynamic balance of average temperature. Conduction: Air is a poor conductor of heat conduction. The air layer is the best material of anti-heat conductive Such as snow

view

What is Irradiated crosslinking polypropylene foam (IXPP foam)

Technical advantages of irradiated crosslinking polypropylene foam (IXPP foam) Irradiated crosslinking polypropylene foam (IXPP foam) products have attracted much attention due to their good thermal stability (maximum temperature up to 130 ℃) and the size stability of products at high temperature, high toughness, tensile strength and impact strength, suitable and compliant

view

What is thermal conductivity?

What is thermal conductivity? Thermal conductivity refers to the ability of a given material to conduct/transfer heat. It is generally denoted by the symbol ‘k’ but can also be denoted by ‘λ’ and ‘κ’. The reciprocal of this quantity is known as thermal resistivity. Materials with high thermal conductivity are used in

view

R-value for construction application

R-value for construction application The Right Insulation…..increases building energy efficiency, improves health and well-being and reduces greenhouse gas emissions and provides more than just efficiency for buildings Environmental benefits:• Buildings account for over 20% of GHG emissions.• Energy consumption in buildings is growing faster than most other areas of use.•

view

NEWS

Miehsuo successfully input the Irradiation accelerator for IXPE and IXPP foam’s irradiation.

Congratulation to all Meishuo staffs and all customers that support Mesihuo’s business! A good news that Huzhou Meishuo New Material Co., Ltd. has successfully installed the irradiation accelerator in mid of November,2021. And it has been input for mass production with a capacity of 40m/min, which not only can almost 100% meet with our internal needs for IXPE foam and IXPP foam (both types of foam need to be crosslinked by irradiation accelerator), but also solved a serious problem that long-time waiting in lines at outsource irradiation suppliers. It always happens in busy period, and influence Meishuo’s production arrangement to some extent. Besides, this process makes our production cost higher a little bit because of transportation of mater slice between two sites. So, Meishuo invested 3,000,000 RMB to self-install an irradiation line to reduce our production cost and relieve our competition pressure with peers. Welcome to inquire us more details about Meishuo foam, you can contact us via

Read More »

What is XPE foam made of ? And its process?

XPE foam is a type of chemically cross-linked polyethylene foam. As XPE foam has closed-cell structure which is so-called independent foaming, so Meishuo has this technic to produce it by following process: Step 1: Masterbatch Different raw material such as pe grains, foaming agent, color agent (expect for natural color), or fire retardant (if needed) mixed fine in proper percentage and heating in internal mixer. Step 2: Masterbatch sheet after extrusion After internal mixing, the masterbatch shall be extruded by single strew extruder to control the thickness and width as designed. Step 3: Foaming Masterbatch sheet in fine thickness after extrusion process, technics will foam it in set temperature in horizontal ovens. (Meishuo has 2 horizontal ovens up to Sept. 2021) Step 4: In-time testing Quality has to be tested in time before finished product is confirmed. Meishuo has a standard test instruction for workers and quality personnel. Each test result

Read More »

Huzhou Meishuo New Material Technology Co., Ltd. is

Huzhou Meishuo New Material Technology Co., Ltd. is committed to the development, production and sales of cross-linked polyolefin foam materials. The main products are IXPP foam, XPE foam, IXPE foam and ESD anti-static foam. The team of Meishuo has been deeply involved in the industry for 20 years. The R&D team has gathered technical backbones in the industry.IXPP foam is the company’s flagship core product, which carries years of scientific research efforts of the company’s team. Meishuo’s polyolefin foam materials are used in all walks of life, from sports and leisure, medical dressings, cushioning packaging, civil construction to automobile interior parts, and penetrate into all aspects of life.Meishuo is located in Huzhou City, Zhejiang Province, China. The nearby ports are Shanghai Port and Ningbo Port, which are convenient for export. Our business involves Europe, Australia, Southeast Asia and North America.

Read More »