Llámenos 24 horas al día, 7 días a la semana
+86 130 5991 3207Envíenos un correo
info@msfoam.com¿Qué es XPE FOAM?
"X" se refiere a enlaces cruzados
"PE" se refiere a la materia prima resina PE de baja densidad
Así que espuma XPE significa espuma de PE reticulado
Basic Physical Properties:
Parámetro | Typical Value Range | Test Standard | Function |
---|---|---|---|
Density | 60-120 kg/m³ | ISO 845 | Balance between lightweight and strength |
Espesor | 1.0-3.0 mm | ISO 23529 | Adapt to door sheet metal gap |
Resistencia a la tracción | ≥1.5 MPa | ISO 527-3 | Prevent tearing during installation or use |
Alargamiento a la rotura | ≥150% | ISO 527-3 | Fit door surface deformation |
Parámetro | Typical Value Range | Test Standard |
---|---|---|
Water Vapor Transmission Rate | <0.05 g/(m²·24h) | ASTM E96 |
Closed Cell Content | ≥95% | ASTM D6226 |
Temperature Resistance Range | -40℃~120℃ | ISO 6722 |
Oil Resistance (soaked in engine oil) | Volume change rate <2% | ISO 1817 |
Parámetro | Typical Value Range | Test Standard |
---|---|---|
Peel Strength (with sheet metal) | ≥1.2 N/mm | ASTM D903 |
Flame Retardant Rating | UL94 HF-1 or GB 8410 | UL94/GB 8410 |
VOC Emission | Meet automobile factory standards (e.g., PV 3341) | VDA 278 |
Performance Parameters | Typical Value/Range | Test Standard | Ceiling Adaptability Description |
---|---|---|---|
Density | 60-120 kg/m³ | ISO 845 | Low density (60-80kg/m³) for lightweight, high density (80-120kg/m³) for enhanced rigidity |
Espesor | 5-15 mm | Actual measurement | Regular 8-10mm (balancing sound insulation and space occupation) |
Resistencia a la tracción | 0.8-2.5 MPa | ISO 527 | Prevent ceiling skin from collapsing |
Alargamiento a la rotura | 100-300% | ISO 527 | Adapt to ceiling curved surface modeling |
Compressive Strength | 30-100 kPa (50% compression) | ISO 604 | Support ceiling structure, resist compression and deformation |
Conductividad térmica | 0.035-0.045 W/(m·K) | ISO 8301 | Thermal insulation performance better than EPE |
Temperature Resistance | -40℃~+85℃ (105℃ for short term) | ASTM D746 | Adapt to high temperature of car roof in summer |
Flame Retardancy | UL94 HF-1 / GB 8410 | UL94 / National Standard | Vertical burning speed ≤100mm/min |
Absorción de agua | ≤1.0% (24h) | ISO 2896 | Closed-cell structure for moisture proofing and mildew prevention |
VOC Emission | Formaldehyde ≤100μg/m³ | VDA 270 | Need to meet automobile manufacturer's air quality standards |
Performance Parameters | Typical Value/Range | Test Standard | Adaptability Description for Tea Packaging |
---|---|---|---|
Density | 25-60 kg/m³ | ISO 845 | Low density (25-40kg/m³) for lightness and portability; high density (40-60kg/m³) for enhanced protection |
Espesor | 2-10 mm | Actual measurement | Regular 3-5mm (balancing buffering and space occupation) |
Resistencia a la tracción | 0.5-1.5 MPa | ISO 527 | Prevent tearing during transportation |
Alargamiento a la rotura | 100-250% | ISO 527 | Elasticity to adapt to the shape of tea cans |
Compression Set | ≤15% (50% compression, 22h) | ISO 1856 | Good recovery after long-term compression |
Conductividad térmica | 0.035-0.045 W/(m·K) | ISO 8301 | Moderate heat insulation to avoid sudden temperature changes |
Temperature Resistance | -40℃~+85℃ (105℃ for short term) | ASTM D746 | Adapt to cold chain and high-temperature storage |
Absorción de agua | ≤0.5% (24h) | ISO 2896 | Closed-cell structure for moisture proofing to keep tea dry |
VOC Emission | Formaldehyde ≤50μg/m³ | GB 4806.7 | Food contact grade safety |
Environmental Friendliness | Recyclable, no plasticizers | FDA 21 CFR 177.1520 | Meet tea packaging hygiene standards |
Performance Parameter | Typical Value/Range | Test Standard | Pipe Insulation Adaptability Description |
---|---|---|---|
Density | 30-100 kg/m³ | ISO 845 | Low density (30-50kg/m³) for light pipes; high density (60-100kg/m³) for high-temperature/high-pressure pipes |
Espesor | 10-50 mm | ASTM C518 | Standard 20-30mm (for low-temperature pipes); thicker for high-temperature pipes |
Conductividad térmica | 0.032-0.040 W/(m·K) | ISO 8301 | Better than EPE (0.045-0.055), similar to rubber-plastic (0.034-0.038) |
Temperature Resistance | -40℃~+85℃ (105℃ short-term) | ASTM D746 | Suitable for standard HVAC pipes (chilled water ≤7℃, hot water ≤85℃) |
Resistencia a la tracción | 0.8-2.0 MPa | ISO 527 | Prevents installation tearing; longitudinal tensile strength ≥1.5MPa |
Closed Cell Content | ≥90% | ASTM D6226 | High closed-cell structure ensures waterproofing and moisture resistance |
Flame Retardancy | Class B1 (GB 8624) | GB/T 8626 | Self-extinguishing, oxygen index ≥32% |
Absorción de agua | ≤1.0% (24h) | ISO 2896 | Long-term moisture resistance, prevents condensate penetration |
VOC Emission | Formaldehyde ≤50μg/m³ | GB/T 29899 | Meets indoor air quality requirements |
Performance Parameter | Typical Value/Range | Test Standard | Floor Mat Adaptability Description |
---|---|---|---|
Density | 50-150 kg/m³ | ISO 845 | Low density (50-80kg/m³) for lightweight use; high density (100-150kg/m³) for high durability |
Espesor | 5-20 mm | Actual measurement | 5-10mm for household use; 10-20mm for commercial applications |
Resistencia a la tracción | 0.8-2.5 MPa | ISO 527 | Tear resistance for extended service life |
Alargamiento a la rotura | 100-300% | ISO 527 | High elasticity for comfortable stepping |
Compression Set | ≤15% (50% compression, 22h) | ISO 1856 | Good resilience after long-term compression |
Conductividad térmica | 0.035-0.045 W/(m·K) | ISO 8301 | Moderate thermal insulation for winter warmth |
Temperature Resistance | -40℃~+85℃ (105℃ short-term) | ASTM D746 | Suitable for floor heating environments (≤60℃) |
Slip Resistance | Static friction coefficient ≥0.6 | ASTM D1894 | Surface embossing or composite anti-slip layer |
Absorción de agua | ≤1.0% (24h) | ISO 2896 | Closed-cell structure for moisture resistance and easy cleaning |
VOC Emission | Formaldehyde ≤50μg/m³ | GB/T 29899 | Meets indoor environmental protection standards |
Environmental Friendliness | Recyclable, plasticizer-free | RoHS / REACH | SGS certified |
Performance Parameter | Typical Value/Range | Test Standard | Yoga Mat Adaptability Description |
---|---|---|---|
Density | 50-120 kg/m³ | ISO 845 | Low density (50-80kg/m³) for portability; high density (80-120kg/m³) for enhanced support |
Espesor | 3-15 mm | Actual measurement | 8-10mm for beginners; 3-6mm for professionals |
Resistencia a la tracción | 0.8-2.5 MPa | ISO 527 | Tear resistance for extended service life |
Alargamiento a la rotura | 100-300% | ISO 527 | High elasticity to adapt to large-range movements |
Compression Set | ≤15% (50% compression, 22h) | ISO 1856 | Not easy to collapse after long-term use |
Rebound Rate | ≥50% | ASTM D3574 | Provide movement stability |
Slip Resistance | Static friction coefficient ≥0.6 | ASTM D1894 | Surface embossing or composite anti-slip layer |
Temperature Resistance | -40℃~+85℃ (105℃ short-term) | ASTM D746 | Adapt to indoor and outdoor temperature differences |
Absorción de agua | ≤1.0% (24h) | ISO 2896 | Closed-cell structure to prevent sweat and mildew |
VOC Emission | Formaldehyde ≤50μg/m³ | GB/T 29899 | Meet indoor environmental protection standards |
Environmental Friendliness | Recyclable, plasticizer-free | RoHS / REACH | SGS certified |
Performance Parameter | Typical Value/Range | Test Standard | Sports Protective Gear Adaptability Description |
---|---|---|---|
Density | 60-200 kg/m³ | ISO 845 | Low density (60-100kg/m³) for lightweight design; high density (120-200kg/m³) for high impact resistance |
Espesor | 5-30 mm | Actual measurement | 10-20mm for knee/elbow pads; 20-30mm for shin guards |
Resistencia a la tracción | 1.0-3.0 MPa | ISO 527 | Prevents tearing during sports activities, high durability |
Alargamiento a la rotura | 150-350% | ISO 527 | High elasticity to conform to joint movements |
Compressive Strength | 50-200 kPa (50% compression) | ISO 604 | Absorbs impact energy (e.g., fall cushioning) |
Rebound Rate | ≥60% | ASTM D3574 | Quick shape recovery for continuous protection |
Temperature Resistance | -40℃~+85℃ (105℃ short-term) | ASTM D746 | Withstands outdoor temperature variations |
Absorción de agua | ≤1.0% (24h) | ISO 2896 | Closed-cell structure resists sweat and odor |
VOC Emission | Formaldehyde ≤50μg/m³ | GB/T 29899 | Safe for direct skin contact |
Environmental Friendliness | Recyclable, plasticizer-free | RoHS / REACH | SGS certified |