
IXPE 폼
Irradiated Cross-Linked Polyethylene Foam
IXPE (irradiated cross-linked polyethylene foam) features a fine, uniform closed-cell structure with excellent cushioning, sound insulation, waterproofing and flexibility. It is widely used in automotive interiors, foam tape substrates, sports goods, flooring underlay and packaging.
- Fine uniform cell structure for stable cushioning and shock absorption
- Excellent sound insulation and waterproof performance
- Good flexibility and easy processing, suitable for lamination and cutting
- Low VOC and environmentally friendly materials
IXPE Foam Specification
The table below helps engineers and purchasing managers compare density, mechanical strength and dimensional stability across expansion ratios. TD = transverse direction, MD = machine direction.
| Property | Unit | 테스트 표준 | 5× | 10× | 15× | 20× | 25× | 30× |
|---|---|---|---|---|---|---|---|---|
| 밀도 | kg/m³ | ISO 845, GB/T 6343 | 200±30 | 100±10 | 66±8 | 50±6 | 40±5 | 33±5 |
| 두께 | mm | 내부 | 0.5–3 | 0.5–3 | 1–3 | 1–3 | 1.5–3 | 2–3 |
| 너비 | mm | 내부 | ≤1200 | ≤1500 | ≤1700 | ≤1800 | ≤1800 | ≤1800 |
| Tensile Strength (TD) | MPa | ISO 1798, GB/T 6344 | ≥1.00 | ≥0.60 | ≥0.50 | ≥0.40 | ≥0.30 | ≥0.20 |
| Tensile Strength (MD) | MPa | ISO 1798, GB/T 6344 | ≥1.20 | ≥0.80 | ≥0.60 | ≥0.50 | ≥0.40 | ≥0.30 |
| Elongation at Break (TD) | % | ISO 1798, GB/T 6344 | ≥140 | ≥130 | ≥120 | ≥110 | ≥100 | ≥100 |
| Elongation at Break (MD) | % | ISO 1798, GB/T 6344 | ≥150 | ≥140 | ≥130 | ≥120 | ≥110 | ≥100 |
| Tear Strength (TD) | kN/m | QB/T 1130 | ≥3.5 | ≥3.0 | ≥2.5 | ≥2.0 | ≥1.3 | ≥1.0 |
| Tear Strength (MD) | kN/m | QB/T 1130 | ≥4.0 | ≥3.5 | ≥3.0 | ≥2.2 | ≥1.5 | ≥1.2 |
| Dimensional Stability (80°C, 24h, TD) | % | ISO 2796, GB/T 8811 | ≤±2.0 | ≤±2.0 | ≤±2.0 | ≤±3.0 | ≤±3.0 | ≤±4.0 |
| Dimensional Stability (80°C, 24h, MD) | % | ISO 2796, GB/T 8811 | ≤±2.0 | ≤±3.0 | ≤±3.5 | ≤±4.0 | ≤±5.0 | ≤±6.0 |
| 수분 흡수 | % | ISO 62, GB/T 1034 | ≤0.2 | ≤0.2 | ≤0.2 | ≤0.3 | ≤0.3 | ≤0.3 |
| Flame Retardant | – | UL94, GB 8410 | UL94 HF-1 | |||||
Values are typical per expansion ratio. Thin sheets up to 3 mm. Thicker IXPE sheets from 3 mm to 15 mm are listed in the XPE / IXPE thick sheet table.
RoHS 10 Items
All ten restricted substances are tested as not detected (N.D.), complying with EU RoHS requirements.
| Test Item | Result | Limit | Unit |
|---|---|---|---|
| Lead (Pb) | N.D. | 1000 | mg/kg |
| Cadmium (Cd) | N.D. | 100 | mg/kg |
| Mercury (Hg) | N.D. | 1000 | mg/kg |
| Hexavalent Chromium (Cr6+) | N.D. | 1000 | mg/kg |
| PBBs | N.D. | 1000 | mg/kg |
| PBDEs | N.D. | 1000 | mg/kg |
| DIBP | N.D. | 1000 | mg/kg |
| DBP | N.D. | 1000 | mg/kg |
| BBP | N.D. | 1000 | mg/kg |
| DEHP | N.D. | 1000 | mg/kg |
REACH 247 SVHC
All 247 substances on the EU SVHC candidate list are tested as not detected, qualified for EU REACH compliance.
| Item | Result | Standard Requirement |
|---|---|---|
| 247 SVHC Substances | N.D. | <0.1% |
| Conclusion | Qualified | EU REACH Compliance |
Safety & Stability
Safe to handle, store and transport under normal conditions.
| Item | Status |
|---|---|
| Appearance | Solid sheet |
| Odor | Odorless |
| Skin Contact | No irritation |
| Eye Contact | No irritation |
| Stability | Stable under normal conditions |
| Storage | Normal temperature |
| Disposal | Recyclable / Incinerable |
| Transportation | Non-dangerous goods |
Frequently Asked Questions
A: XPE is chemically cross-linked polyethylene, IXPE is electron-beam irradiated polyethylene, and IXPP is irradiated polypropylene. All are closed-cell foam with waterproof, cushioning and insulation properties. Performance and price rise in that order. Choose XPE for cost-effective applications, IXPE for balanced performance, and IXPP for high-heat and high-strength applications.
A: Expansion ratio ranges from 5× to 35×, with single-layer thickness from 0.8 mm to 10 mm depending on material and ratio. Thicker sheets are available by lamination up to a maximum of 60 mm.
A: Yes. Our foam can be made flame-retardant to UL94 HF-1, the highest HF classification for foam materials.
A: Yes. We offer lamination, skiving, slitting, die-cutting and film coating to match your size, thickness and density requirements. Send us your drawing for a quote, and samples are available on request.